Sony Handycam DCR-PC5 Operating Instructions Manual page 29

Playing back a tape
Usingthe Remote Commander
Press DATA CODE button on tbe Remote Commander in tbe playback mode.
The display changes as follows:
date/time -+ various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperttne value) -+ no indicator
Not to display various settings
Set DATA CODE to DATE in tbe menu settings using tbe Remote Commander (p. 89).
Date/time
[a] SteadyShot
OFF indicator
[b] Exposure
mode indicator
[o] White balance indicator
[d] Gain indicator
[el Shutter speed indicator
[f] Aperttne value indicator
Various settings
I J
/'
Recording data
Recording data is your camcorder's in%rmation when you have recorded. In the
recording mode, the recording data will not be displayed.
When you use the data code function, bars (...... ) appear if:
• A blank sertion of the tape is being played bark.
• The tape is tmreadable due to tape damage or noise.
• The tape was recorded by a camcorder without the date and time set.
Data code
Wben you ronnert yotn camrorder to the TV, the data rode also appears on the TV
screen (p. 31).
"o
g
I
To operate video control buttons, set the POWER switch to VCR.
To view a still picture (playback pause)
Press _/11 during play/oark. To resume playback, press _/11 again.
To advance the tape
Press [_K_]/_ in tbe stop mode. To resume normal playback, press _/raP--.
To rewind the tape
Press {_/'<_ in tbe stop mocie. To resume norn-lal playbark, press [_]/_'-.
29