Sony Handycam DCR-PC5 Operating Instructions Manual page 28

Playing back a tape
When monitoring on the LCD screen
You can turn tile LCD panel over and move it hack to the camcorder hody with tile LCD
screen facing out.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open/close the LCD panel
Open/close tile LCD panel vertically.
When monitoring in the viewfinder
Turn the LCD panel over and move it hack to the camcorder body with the LCD screen
liming out, and pull out the viewfinder tmtil it clicks. In this case, the picture is not
displayed on the LCD screen.
28
Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear on the LCD screen.
To make the indicators appear, press DISPLAY/TOUCH PANEL again.
Using the data code function
Your rameorder automatically records not only
images on
the tape hut also the
recording data (date/time or various settings when recorded) (Data code).
Follow the steps helow to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) In the playback mode. press FN and select PAGE3.
(2) Press DATA CODE.
(3) Select CAM DATA or DATE DATA. then press _ OK.
(4) Press EXIT.