3D Settings - Smart Technologies SMART Board 600i5 Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
High Speed Fan
Projector Mode
Source
VGA1
VGA2
S-Video
Composite
HDMI
Emergency Alert
Alarm Message
Control panel II

3D settings

This menu allows you to enable or disable 3D image display and set its format.
Submenu setting
3D On/Off
3D Invert
3D Format
61
Description
Adjusts the speed of the projector's fan. Select High or Normal.
N
N O T E
Use the High setting when the projector's temperature is high or the
altitude is above 6000' (1800 m).
Adjusts the projection mode to Front, Ceiling, Rear or Rear Ceiling.
I
I M P O R T A N T
SMART recommends that you never change this setting from the
Ceiling projection mode.
Adjusts the input source to VGA-1, VGA-2, Composite, S-Video or
HDMI.
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.
Assigns an alternative name to your VGA 2 input, which appears
when you select the VGA 2 input.
Assigns an alternative name to your S-video input, which appears
when you select the S-video input.
Assigns an alternative name to your Composite video input, which
appears when you select the Composite video input.
Assigns an alternative name to your HDMI input, which appears when
you select the HDMI input.
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Displays an on-screen emergency notification message (maximum
60 characters).
Description
Turns the 3D feature on or off.
Selects the 3D Invert setting (L-R or R-L).
L-R displays visual data for the left eye first.
l
R-L displays visual data for the right eye first.
l
Selects the 3D format (Interleaved or Under-over).
Interleaved breaks down the image frame for each eye,
l
alternately displaying a line of visual information from each
frame.
Under-over concurrently displays horizontally stretched image
l
frames for each eye, one above the other.