Controller Specifications - Epson EPL-N1600 Service Manual

EPSON EPL-N1600
Prohibited paper types: The following paper types should never be
used. Attempts to feed these paper types
may result in inferior print quality, paper jams,
and damage to the printer.
*Carbon paper, "non-carbon" paper
*Thermal paper, pressure-sensitive paper
*Acidic paper
*Inkjet-dedicated paper
*Paper or postcard already printed on by
thermal-transfer printer or inkjet printer
*Thin or thick paper (exceeding the
specification)
*Damp paper
*Paper with coated or processed color
surface
*Paper with extra smooth or extra rough
surface
*Paper whose rear side has very inconsistent
smoothness
*Perforated paper
*Folded, curled, or torn paper
*Paper of irregular shape
*Paper cut at off-angle
*Label sheets that peel too easily
*Paper with clips, staples, glue, etc.
*Transparency film designed for color copy or
page printer
Paper Ejection: Face-down or Face-up (option)
Ejection capacity: <Face-down>
250 sheets (Xerox 4024 paper (75 g/m²))
<Face-up> (with optional face-up tray)
40 sheets (Xerox 4024 paper (75 g/m²))
Rev. A

1.2.3 CONTROLLER SPECIFICATIONS

CPU: RISC-CPU (VR4300 / 150MHz)
RAM: <Standard>
<Optional>
(Accepts 4MB to 32MB EDO-RAM SIMM)
Maximum memory is 40MB
ROM: Font:
Program:
(Installed in ROM-DIMM socket)
Expansion ROM: 2 ROM-DIMM slots (A/B slots)
A slot=For C83229* (EPSONScript) module
B slot=For local-font ROM module only
Interfaces: <Standard>
*Bidirectional parallel I/F (B type connector)
(IEEE-1284 compliant / Compatibility, Nibble
and ECP mode)
*RS-232C serial I/F (D-SUB 25pin)
<Optional>
*Type-B interface slot (1 slot)
Control Panel: *8 push-button switches and 6 LED lamps.
*LCD Panel (1-line 20-column)
Software: *PCL5e emulation mode
*FX, ESC/P2, I239X emulation mode
*ESC/Page mode
*GL/2 mode
Other Feature: Built-in engine controller
Chapter 1 Product Description
8MB EDO RAM
1 EDO-RAM SIMM slot
2MB (on-board)
4MB (on ROM-DIMM module)
17