EPSON EPL-N1600
4.3.29 Actuator-Exit
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove Roll Assembly Exit Out.(Section 4.3.27)
7. Remove the Fuser Assembly. (Section 4.3.31)
8. Pull the Actuator-Exit out of the retaining slots in the Printer Frame.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-35. "Actuator-Exit" Removal
4-138