Epson EPL-N1600 Service Manual page 95

EPSON EPL-N1600
3.14 UNFUSED IMAGE
Problem
The image is not fully fused to the
paper. The image is easy to rub
off.
Rev. A
Suspect Components
The following components are assosiated with
this specific problem. One or more of these
components may have failed partially or
completely. If you can not isolate the problem
using this procedure, replace each components
listed below, one at a time, until the problem
disappears.
• Fuser Assy.
• PWBA Hotaru
Step Action and Question
1 PAPER CONDITION
• Is the paper damp?
• Is the paper wrinkled?
4 FUSER ASSY
Replace the Fuser Assy.
Is the print image still unfused?
Chapter 3 Troubleshooting
Yes No
Replace with a Go to Step 2.
new, dry paper.
Replace Problem
C258MAIN solved.
Board.
97