Epson EPL-N1600 Service Manual page 91

EPSON EPL-N1600
3.10 GHOST PRINT
Problem
There are ghost image appeared
on the image. The image may be
either ghosts of the previously
printed page or the part of the
image being printed on the
current page.
Rev. A
Suspect Components
The following components are assosiated with
this specific problem. One or more of these
components may have failed partially or
completely. If you can not isolate the problem
using this procedure, replace each components
listed below, one at a time, until the problem
disappears.
• No recommendation
Step Action and Question
1 REPETITIVE PRINTING
Inspect the ghost image.
Was the user printing numerous
copies of the same image?
2 Print 30 pages of various images.
Do ghost image still appear?
3 IMAGING CARTRIDGE
Install a new Imaging Cartridge.
Is the print image normal?
4 ROLL FUSER AND ROLL PRESS
1. Remove the Fuser Assy.
2. Inspect the Roll Fuser and the Roll
Press for scratches and
contamination.
Are these Rolls free of scratches and
contamination?
Chapter 3 Troubleshooting
Yes No
Go to Step 2. Go to Step 3.
Go to Step 3. Problem
solved.
Avoid printing
the same image
for many
copies.
Problem solved. Go to Step 4.
Go to suspect Replace the
component. Roll Fuser or
the Roll Press.
93