Status Messages - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

3.1.2.1 Status Messages

The table below shows the Status message displayed by the printer and
the meaning of each message.
Table 3-3. Printer Message - Status
LED Description
ROM check
Online: The printer is checking
checksumm and format of
Continue:
program ROM.
RAM check
Online: The printer is checking function
and capacity of RAM memory.
Continue:
Self Test
Onlin: The printer is performing
diagnostics and initialization
Continue:
process.
Reset All
Online: The warm-boot process is in
progress. When the warm-boot
Continue:
process completes, the
message is changed to "Reset"
and perform the reset
operation.
Reset
Online: The reset process is in
progress.
Continue:
Reset to Save
Online: OFF The panel settings is changed
by the panel setting mode
Continue:
during print job process.
Rev. A
Action
-----
-----
-----
-----
-----
The mesage is cancelled by one
of the following operation:
• Press Online button and the
panel settings is cacelled. The
printer is back to Readt state.
• Perform Reset or Warm-boot
process. The panel settings
becomes valid and all print
jobs are cancelled.
LED Description
Writing DIMM A
Online: The printer is writing data to the
ROM module
Continue:
Form Feed
Online: The printer is priting the
remaining print job.
Continue:
Warming Up
Online: One of READY state message.
The printer is in warm-up
Continue:
process.
Offline
Online: OFF The printer is not ready to start
printing operation.
Continue:
Standby
Online: The printer is in stand-by state
(Power save mode).
Continue:
Chapter 3 Troubleshooting
Action
*Do not remove the module or
turn the printer off while the
printer is writing the data.
-----
-----
Press Online button to back to
Ready state.
-----
61