EPSON EPL-N1600
4.3.52 Guide R (A) and (B)
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Disconnect J221 (Toner Sensor) from the HPS (1).
7. Remove the four screws that secure the Guide Actuator to the
Printer Frame and remove the Guide Actuator (2).
8. Unhook the Spring and remove it.
9. Slide the Guide R (A) and (B) out of the slot in the Printer Frame.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-58. "Guide R (A)/(B)" Removal
4-161