Roll-Press And Bearing-Pressure Roll - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.28 Roll-Press and Bearing-Pressure Roll

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove Roll Assembly Exit Out.(Section 4.3.27)
7. Remove the Fuser Assembly. (Section 4.3.31)
8. Pull up one end of the Roll-Press out of the Bearing Pressure Roll
and lift the Roll-Press out of the Printer Frame.
Do not touch the surface of the Roll-Press with fingers.
Hold the Roll-Press by the shaft or the ends of the Roll-
Press.
9. Remove the two screws that secure each Bearing Pressure Roll.
10. Lift the Bearing-Pressure Roll off the Printer Frame.
Rev. A
Chapter 4
Figure 4-34. "Roll-Press / Bearing-Pressure Roll" Removal
Disassembly and Assembly
4-137