Epson EPL-N1600 Service Manual page 63

EPSON EPL-N1600
LED Description
Duplex Mem Overflow
Online: OFF The available memory is
insufficient to process the data
Continue: Blink
for second face of duplex
printing.
The printer only prints first face
and eject the page.
Invalid ROM A
Online: OFF Unusable ROM module is
installed.
Continue: OFF
(i.e ROM module that not being
formatted and write-protected,
or defective one.)
Write Error ROM A
Online: OFF The printer tried to write on
write-protected ROM module,
Continue: OFF
or writing operation was
incomplete. Or ROM module is
not installed in Slot-A.
Rev. A
Action
1. If "Auto Cont=OFF":
The error can be cancelled by
either:
• Press Continue button causes
the printer to reprocess the
data for second face and print
it on the second face of nnext
page.
• Perform Rest or Warm-boot,
and retry printing by setting
"Auto Cont=ON".
2. If "Auto Cont=ON":
In this case, the error is cancelled
automatically after passing the
specified period of time, and the
printer print a second face as
case-1) above.
Turn the printer off and remove
the ROM module.
Perform wither::
• Turn the printer off and
remove the ROM module
• Perform Reset-All operation.
Chapter 3 Troubleshooting
65