Pad Assembly Retard And Stopper Paper - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.26 Pad Assembly Retard and Stopper Paper

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the Lever Jam Clear, Spring-Hold Rod, Stopper Rod, and
Spring Nip Pre-Registration (steps 6 and 7 of RRP 4.1.1).
7. Remove the Frame Assembly MBF .(Section 4.3.19)
8. Remove the Roll Assembly MBF .(Section 4.3.21)
9. Remove the Holder Gear MBF . (Section 4.3.22)
10. Remove the Gear Assembly MBF . (Section 4.3.23)
11. Remove the Plate Assembly Bottom MBF. (Section 4.3.24)
12. Release the two latches of the Pad Assembly Retard by a flat
screwdriver blade and pull up the Pad Assembly Retard off of the
two pivot points.
13. Pull up the Stopper Paper off of the two pivot points.
Rev. A
Chapter 4
Figure 4-32. "Pad Assembly / Stopper Paper" Removal
Disassembly and Assembly
4-135