EPSON EPL-N1600
3.2 Troubleshooting
The basic troubleshooting is divided into three catogories and the
procdures to follow for proceeding the troubleshooting is outlined in the
flowchart shown below.
Figure 3-1. Troubleshooting Flow
Rev. A
3.2.1 Troubleshooting with Error Messages
1.1 SERVICE REQ E0008
Read or write error is occured with the EEPROM on the Engine control
circuit.
Step
Actions and Questions
SUSPECT COMPONENTS
The following components are
associated with this specific problem.
One or more of these components may
have failed partially or completely. If you
cannot isolate the problem using this
FIP, replace each component listed
below, one at a time, until the problem
disappears.
• C258MAIN BOARD
1
Switch printer power on and off several
times.
Does this error occur whenever printer
power is switched on?
Chapter 3
Troubleshooting
Yes
No
Replace the
-----
C258MAIN
Board.
67