Epson EPL-N1600 Service Manual page 62

EPSON EPL-N1600
LED Description
Print Overrun
Online: OFF Due to complexity of print job
data, the printer is unable to
Continue: Blink
continue the data process and
causing an overrun.
Invalid AUX I/F Card
Online: OFF The optional I/F card which is
not supported by this printer, is
Continue: OFF
installed.
Rev. A
Action
1. If "Auto Cont=OFF":
The error can be cancelled by
either:
• Press Continue button causes
the printer to retry printing with
all available vacant memory. If
no memory left or printing
failed again, the
corresponding page is deleted
and processing the next page.
• Perform Rest or Warm-boot,
and retry printing by setting
"Auto Cont=ON".
2. If "Auto Cont=ON":
In this case, the error is cancelled
automatically after passing the
specified period of time, and the
printer retry priting as case-1)
above.
Turn the printer off and remove
the I/F card.
LED Description
Mem Overflow
Online: OFF Memory capacity become
insufficient during the data
Continue: Blink
process.
Chapter 3 Troubleshooting
Action
1. If "Auto Cont=OFF":
The error can be cancelled by
either:
• press Continue button and a
printer operation is different
afterwards depending on the
cause of error. If a buffer
overflow is a cause of error, a
command causing the error is
discarded and the page
processed already is ejjected.
If the error occurs when
processing the first face of
duplex print data, the page is
ejected with only first face
printed, and a second face is
printed on next page. In case if
the error occurs while
registering a Macro-pattern, a
command causing the error is
discarded and the printer
continue the process.
• perform Reset or Warm-boot.
2. If "Auto Cont=ON":
In this case, the error is cancelled
automatically after passing the
specified period of time, and the
printer operates as case-1).
64