EPSON EPL-N1600
4.3.40 Sensor Toner
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Disconnect J221 from the HPS.
7. Raise the free end of the Chute Inlet Registration and hold the
Chute upright.
8. Spread apart the bracket arms that hold the Sensor Assembly Toner
and remove the Sensor.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-46. "Sensor Toner" Removal
4-149