Scanner Drive Assembly; Removing The Scanner Drive Motor - Canon NP6251 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
A. Scanner Drive Assembly

1. Removing the Scanner Drive Motor

1) Remove the RDF/copyboard cover.
2) Remove the machine's rear cover.
3) Remove the three mounting screws each, and remove the RDF/copyboard cover.
Caution:
The mounting screws used on the RDF/copyboard cover are longer than others.
4) Remove the rear upper cover.
5) Remove the rear right cover.
6) Remove the multifeeder assembly.
7) Remove the five mounting screws
remove the RDF rear right mount
3-24
COPYRIGHT © 1997 CANON INC.
, and disconnect the two connectors
.
Figure 3-501
Figure 3-502
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
; then,