Canon NP6251 Service Manual page 561

CHAPTER 11 TROUBLESHOOTING
9. Adjusting the Position of the Pick-Up Roller Releasing Solenoid (cassette)
Turn the screw to adjust so that the distance of the bottom edge of the A roller
support plate bushing from the bottom face of the pick-up unit of each holder is 36 ±0.5
mm when the plunger of the pick-up roller releasing solenoid is pulled as shown.
A
Figure 11-234
11-30
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)