Scanner Drive Assembly - Canon NP6320 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
B.

Scanner Drive Assembly

1. Detaching the Scanner Cable
1) Mark the position of the mount, and loosen screw B (1 pc.), which holds the mount in place.
2) Loosen screw A (1 pc.), and detach the scanner cable.
2. Attaching the Scanner Cable
1) Route the scanner cable as shown in Figure 3-404.
2) Position the fixing plate where a mark has been put using screw A.
3) Tighten screw B.
Under grove of the pulley
[1]
[3]
Pulley 2
Screw B
Mark
Screw A
the position
3-16
COPYRIGHT © 1999 CANON INC.
Pulley 1
[4]
4 turns
Figure 3-404 Scanner Drive Assembly
CANON NP6320 REV.0 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Top groove of the pulley
[6]
[2]
Under groove of the
pulley
(rear)
Scanner pulley
Pulley 3
[5]