Canon NP6251 Service Manual page 572

CHAPTER 11 TROUBLESHOOTING
Reference:
The paper is discharged halfway out. It is then discharged in about 20 sec.
5) Measure the nip.
4. Adjusting the Fixing Clutch
If you have replaced any parts that make up the following, adjust the set screw so
that the distance between 41T gear and the control ring is 0.1 to 0.3 mm (about 4
2
sheets of plain paper 64 g/m ).
Figure 11-247
11-41
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)