Electrical System; Removing The Side Deck Driver Pcb; Removing The Open Switch Pcb - Canon NP6251 Service Manual

E. Electrical System

1. Removing the Side Deck Driver PCB

1) Detach the deck from the copier; then, remove the six screws, and remove the rear
cover.
2) Disconnect the 10 connectors
deck driver PCB

2. Removing the OPEN Switch PCB

1) Detach the deck from the copier, and push down the latch plate
compartment
COPYRIGHT © 1997 CANON INC.
, and remove the four screws
.
Figure 8-500
with a finger to open the compartment.
(rear)
Figure 8-501
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK-A1
; then, remove the
of the
8-49