Scanner Drive Assembly - Canon NP6512 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
A.

Scanner Drive Assembly

1. Removing the Scanner/Lens Drive
Motor
1) Remove the front lower cover.
(See Chapter 7.III.A.2. "Removing the
Front Lower Cover.")
2) Remove the developing assembly.
(See Chapter 4.II.D.2. "Removing the De-
veloping assembly.")
3) Remove the copyboard glass.
(See Chapter 7.III.C.1. "Removing the
Copyboard Glass.")
4) Remove the four screws [1], and detach
the lens cover [2].
5) Disconnect the connector (J110) [3] from
the DC controller PCB.
3-14
COPYRIGHT © 1999 CANON INC.
[1]
[3]
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 3-301
Figure 3-302
[1]