Removing The Control Panel Controller (Cpu) Pcb - Canon NP6251 Service Manual

4. Removing the Control Panel Controller (CPU) PCB

1) Remove the five mounting screws
plate and the control panel controller (CPU PCB)
2) Remove the 13 mounting screws
COPYRIGHT © 1997 CANON INC.
; then, remove the control panel right support
Figure 7-426
, and remove the numeric keypad
Figure 7-427
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
.
.
7-27