Pick-Up Vertical Path Roller Assembly - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
E. Pick-Up Vertical Path Roller Assembly
1. Removing the Pick-Up Vertical Path Roller Assembly
1) Open the upper right door and the lower right door.
2) Remove the right deck pick-up assembly/cassette pick-up assembly.
3) Remove the two mounting screws
the pick-up vertical path roller assembly
5-92
COPYRIGHT © 1997 CANON INC.
Feeding roller assembly
Belt pulley
Feeding roller
Figure 5-854
Figure 5-855
Feeding roller shaft
Marking (roller)
, and disconnect the connector; then, remove
.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
(front)