Changing The Deck Paper Size - Canon NP6251 Service Manual

Hide thumbs Also See for NP6251:

Table of Contents

CHAPTER 8 PAPER DECK-A1

3. Changing the Deck Paper Size

If you need to change the paper size for the paper deck to suit the user's needs,

perform the following:

1) Open the compartment of the paper deck, and remove all copy paper.

2) If the lifter of the paper deck is up, turn on the copier, and push the sensor lever

of the paper supply position sensor inside the compartment

lowers to the lower limit.

3) Remove the screw

new paper size.

4) Remove the screw

Figure 8-358

, and fix the trailing edge guide plate

(1 each), and fix the left/right guide plate

Figure 8-359

CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

so that the lifter

in position to suit the

to suit the new

Table of Contents