Canon NP6251 Service Manual page 286

7) Remove the three harness retainers
connector ; then, remove the screw
8) Remove the two screws
COPYRIGHT © 1997 CANON INC.
and two edge saddles
Figure 5-867
, and remove the handle support plate
Figure 5-868
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
, and remove the cord guide
, and disconnect the
.
.
5-99