Removing - Canon NP6251 Service Manual

2. Removing

1) Open the front door, and slide out the process unit, fixing/feeding unit, and holding
tray assembly about 10 cm from the copier.
2) Remove the rear cover.
3) Remove the high-voltage transformer PCB and the high-voltage transformer
assembly.
4) Remove the waste toner bottle.
5) Remove the cleaner fan, feeding fan, and developing fan.
6) Remove the fixing/waste toner drive assembly.
7) Free the harness guide 1. (See Figure 7-446.)
8) Detach the timing belt.
9) Remove the two mounting screws
COPYRIGHT © 1997 CANON INC.
, and remove the deck relay drive assembly
Figure 7-454
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
.
7-43