Removing The Vertical Path Cover (Rear) - Canon NP6251 Service Manual

CHAPTER 8 PAPER DECK-A1

2. Removing the Vertical Path Cover (rear)

1) Remove the deck from the copier; then, remove the six screws
rear cover .
2) Holding the vertical path assembly opening/closing grip, open the deck vertical path
assembly.
3) Remove the two screws
8-24
COPYRIGHT © 1997 CANON INC.
, and remove the vertical path cover (rear)
Figure 8-305
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and remove the
.