Canon NP6251 Service Manual page 372

4) Remove the mounting screw
5) Open the front door; then, remove the three mounting screws
cover , and disconnect the connector, and open the hopper
Caution:
Check to make sure that the connector is connected before installing the hopper
assembly.
COPYRIGHT © 1997 CANON INC.
of the control panel.
Figure 7-418
Figure 7-419
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
and the connector
.
7-23