CHAPTER 3 EXPOSURE SYSTEM
B.
Scanner Drive Assembly
1.
Detaching the Scanner Cable
1) Mark the position of the mount, and
loosen screws B (2 pcs.), which hold the
mount in place.
2) Loosen screw A (1 pcs.), and detach the
scanner cable.
2.
Attaching the Scanner Cable
1) Route the scanner cable as shown in Fig-
ure 3-504.
2) Position the fixing plate where a mark has
been put using screw A.
3) Tighten screws B.
Lower groove of the pulley
[1]
[3]
Pulley 2
Screws B
Screw A
3-14
Scanner pulley
[4]
Mark the position
Figure 3-504 Scanner Drive Assembly
COPYRIGHT © 1999 CANON INC.
[2]
Pulley 1
[6]
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6]
Pulley 3
[5]
Top groove of the pulley