Canon NP6251 Service Manual page 565

CHAPTER 11 TROUBLESHOOTING
13. Adjusting the Position of the Holding Tray Paper Deflecting Plate Drive
Solenoid
Install the solenoid so that its stroke (end-to-end distance between rubber silencer
and solenoid) is 5.0 ±0.3 mm.
14. Adjusting the Position of the Holding Tray Assembly Side Guide Plate
Mark the position of the side guide plate with a pencil in advance, and install it with
reference to the marking.
11-34
COPYRIGHT © 1997 CANON INC.
Figure 11-238
Figure 11-239
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)