Scanner Drive Assembly; Removing The Scanner Drive; Motor - Canon NP6260 Service Manual

CHAPTER 3 EXPOSURE SYSTEM
A. Scanner Drive Assembly

1. Removing the Scanner Drive

Motor

1) Remove the RDF/copyboard cover.
2) Remove the machine's rear cover.
3) Remove the three mounting screws
each, and remove the RDF/copy-
board cover.
Caution:
The mounting screws used on the
RDF/copyboard cover are longer
than others.
4) Remove the rear upper cover.
5) Remove the rear right cover.
6) Remove the multifeeder assembly.
7) Remove the three mounting screws
, and disconnect the five connec-
tors ; then, remove the RDF rear
right mount .
8) Remove the mounting screw
and remove the RDF/copyboard
cover detection assembly
3-24
COPYRIGHT © 1997 CANON INC.
1
3
1
,
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
2
Figure 3-501
2
Figure 3-502
4
5
Figure 3-503
2