Fixing/Waste Toner Drive Assembly; Construction; Removing The Waste Toner Bottle; Removing The Fixing/Waste Toner Drive Assembly - Canon NP6251 Service Manual

G. Fixing/Waste Toner Drive Assembly

1. Construction

2. Removing the Waste Toner Bottle

1) Remove the two mounting screws, and remove the lower right cover; then, remove
the waste toner bottle toward the multifeeder.

3. Removing the Fixing/Waste Toner Drive Assembly

1) Open the front door, and draw out the process unit, the fixing/feeding unit, and the
holding tray assembly about 10 cm from the copier.
2) Remove the rear cover.
3) Remove the high-voltage transformer PCB.
4) Remove the cleaner fan and the feeding fan.
5) Remove the waste toner bottle.
COPYRIGHT © 1997 CANON INC.
Figure 7-440
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
7-35