11) Remove the C-ring
12) Remove the C-ring
13) Pull out the bearing
14) Slide out the bearing
the front.
9. Installing the Upper Fixing Roller
Install the upper roller by reversing the steps used to remove it.
• Handling the Upper Roller
If possible, wrap the roller with copy paper so as to protect its surface from dirt and
scratches.
• Installing the Upper Roller
a. Orient it so that the side with a longer cut-off (section A in Figure 6-221) is toward the
rear.
b. Be sure to install the collars
6-221a.
COPYRIGHT © 1997 CANON INC.
and the gear
at the front.
and the gear
at the rear.
and the bushing
and the bushing
Figure 6-220
(front)
Figure 6-221
of the bushing in the correct order shown in Figure
(front)
Figure 6-221a
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
found at the rear to the front.
found at the front of the upper roller to
A
(rear)
(rear)
6-29