User Mode; Types Of User Modes - Canon NP6251 Service Manual

C. User Mode

1. Types of User Modes

The machine provides the following four types of user modes:
1. Settings
2. Adjust/Clean
3. Timer
4. Preference
[1] Settings
Item
Auto Sort
Sorter Front
Access
Skip
Feeder Manual
Feed Auto Start
Auto Cassette
Change/APS
Manual Size
Selection
COPYRIGHT © 1997 CANON INC.
Descriptions
Use it to enable or disable auto sort mode in
response to multiple originals (count of 2 or more)
when the RDF is used.
When the sorter is connected,
ON: Enable sorter auto front access.
OFF: Disable sorter auto front access.
Use it to enable or disable skip copying to avoid
wrong orientation of mirror originals (holes on
odd/even-numbered pages).
ON: Enable skip copy.
OFF: Disable skip copy.
Use it to enable or disable auto start when the RDF
is used for manual feeding (whether copying should
start immediately after pulling in an original or after
a press on the Copy Start key).
ON: Enable auto start.
OFF: Disable auto start.
Use it to enable or disable auto cassette
change/APS when the selected cassette runs out of
copy paper to a cassette holding same-size paper
in continuous copying.
ON: Enable auto cassette change/APS.
OFF: Disable auto cassette change/APS.
Use it to show or not show the multi feeder size
input screen when the multifeeder is selected as the
source of paper.
ON: Show size input screen.
OFF: Do not show size input screen.
Table 1-402(a)
CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
Remarks
Default: ON
Default: ON
Paper: A4,
B5, LTR in
horizontal feed
Default: ON
Default: ON
Default: ON
Default: OFF
1-15