Paper Deck; Removing The Deck From The Copier - Canon NP6251 Service Manual

Hide thumbs Also See for NP6251:
Table of Contents

Advertisement

CHAPTER 8 PAPER DECK-A1
B. Paper Deck

1. Removing the Deck from the Copier

1) To prevent deformation of the roll support plate
(about 8 cm high) on the floor to serve as the base for the deck
2) Remove the right cover. (See p. 8-25.)
3) As shown, match the hole in the deck lower left stay and the hole in the
compartment, and insert a screwdriver
compartment from closing.
8-28
COPYRIGHT © 1997 CANON INC.
Figure 8-350
Compartment left end plate
Lower left stay
Figure 8-351
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, place a stack of copy paper
from inside the compartment to prevent the
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np6350

Table of Contents