IP Cumulative Traffic Statistics
The difference between the IP Trunk Current Traffic Statistics window
and the IP Cumulative Traffic Statistics window (referred to in Chapter
3 of the Getting Started Manual) is that the former shows figures only for
the active call (Current Traffic) on a particular IP trunk of the local AltiServ
system while the other window shows figures for all calls combined
(Cumulative Traffic) to and from remote AltiServ locations.
Resetting Cumulative Statistics
You can reset the AltiWare IP Cumulative Traffic Statistics by clicking
the Reset button. Also, this window automatically resets all fields to 0
when the AltiServ system is shut down and restarted. Statistics gathered
before the reset are not saved.
AltiWare OE System Administration Manual 153