Table of Contents
Advertisement
Trunk Configuration
However you open the Trunk Configuration window, the General window
appears, looking something like this example:
Figure 26. General window, Trunk Configuration
Selecting Trunks to Set Attributes
The title bar of the Trunk Configuration window displays the card and the
channel of the selected trunk.
The list on the left shows all the configured trunks. The location format is
the same as in the Trunk View window, that is, slot:channel—for example,
channel 15 on the board in slot 1 is location 01:15.
When you select a trunk in this list, the options and parameters for the trunk
appear in the settings in the right of the window.
70 AltiWare OE System Administration Manual
Advertisement
Table of Contents
