Table of Contents
Advertisement
System Configuration
Setting General Parameters
The General tab is the default window you see when you open the System
Configuration window. You use this window to set the system area code
and number, operator extension, country, distinctive ring, conference call,
and system park options.
To access the General settings, select System Configuration... on the
Management menu, or click the System Configuration icon. If the System
Configuration window is already open, click the General tab.Here's an
example of the General window.
Figure 1. The General tab window, System Configuration.
You can set the following parameters and options:
•
System ID—reserved for future use.
•
Country—select a location for the system.
•
Manager Extension—type in the system manager's extension
number The system manager has access to system administrator
functions. For information on setting up extensions, see the chapter,
"Extension and Workgroup Configuration" on page 85.
22 AltiWare OE System Administration Manual
Advertisement
Table of Contents
