Table of Contents
Advertisement
Quantum Line Properties
If you select a Quantum board extension and click Line Properties, you'll
see the Quantum Line Properties dialog box. Note that you can use the
Apply to... button to apply these hardware settings to one, some, or all
ports on the board. Using Apply to... is discussed on page 86.
Figure 36. Quantum Line Properties dialog box for extensions
Configure the following hardware extension-specific features:
•
Message Waiting Signal Type—the type of Message Waiting
indicator for the phone set:
— None
— Voltage—voltage-based indicator.
— FSK—Frequency Shift Keying indicator.
— Tone—tone-based indicator.
•
Caller ID Signal Format—the message format with which to send
Caller ID information:
— None
— SDMF—Single Data Message Format for supporting and sending
a single data type, such as phone numbers.
— MDMF—Multiple Data Message Format for supporting and
sending multiple data types, such as name and number information.
AltiWare OE System Administration Manual 93
Setting up Extensions
Advertisement
Table of Contents
