Table of Contents
Advertisement
System Configuration
Using a Tenant Table
If several small businesses or groups want to share an AltiServ system,
specific trunks can be assigned so that each company or group has its own
set of extensions for outbound calling. Each business or group can be set up
as a tenant in AltiWare, where you use the Tenants window to define the
tenants, their call restrictions and call tracking.
The tenant IDs are matched on the one hand to extensions and on the other
hand to trunks, so that extensions are matched to trunks; or, more precisely,
extension tenant IDs are linked to trunk tenant IDs. This configuration
eliminates the need to set up separate access codes for each tenant. Instead,
all extensions can dial the Route Access code for outbound calls.
For information on Route Access, see "Assigning Trunk, IP Trunk, &
Route Access" on page 26.
To access the Tenants window, select System Configuration... on the
Management menu, then click the Tenants tab. Here's an example:
Figure 12. Tenant window, System Configuration
46 AltiWare OE System Administration Manual
Advertisement
Table of Contents
