Data and Internet Integration
2. Display the TCP/IP Properties window to define TCP/IP parameters.
By double-clicking on the TCP/IP Protocol selection, you will
display the window shown in Figure 64, where you configure the IP
Address, Subnet Mask, and Default Gateway (router).
Figure 64. TCP/IP Configuration
•
IP address - enter the assigned IP address (from the block of IP
addresses obtained from your ISP) to the AltiServ.
• Subnet Mask - enter the Subnet Mask obtained from your ISP.
• Default Gateway - enter the Email Gateway (the router address).
162 AltiWare OE System Administration Manual