Table of Contents
Advertisement
Data and Internet Integration
Step 2: Setup the Router
Install the router on the LAN. The router is the gateway to another LAN or
to the Internet.
1. Specify a router that is on the same LAN as the AltiServ server, such as
ISDN or T1.
2. Assign an IP address (one of the block of IP addresses obtained from
the ISP to the router). This becomes the gateway router address.
Step 3: Configure TCP/IP Properties
Configure the TCP/IP protocol parameters.
1. Select the TCP/IP Protocol from the Installed Network Software.
Open the Control Panel and select the Network icon. This will
display the Network Setting window, as illustrated in Figure 63. On
the Protocols tab, double click on TCP/IP Protocol from the drop-
down list box.
160 AltiWare OE System Administration Manual
Advertisement
Table of Contents
