Switchport General Ingress-Filtering Disable; Switchport General Acceptable-Frame-Type Tagged-Only - Dell PowerConnect 3424 Cli Reference Manual

switchport general ingress-filtering disable

The switchport general ingress-filtering disable Interface Configuration mode command
disables port ingress filtering. To return to the default configuration, use the no form of this
command.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables port ingress filtering on Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general ingress-filtering disable

switchport general acceptable-frame-type tagged-only

The switchport general acceptable-frame-type tagged-only Interface Configuration mode
command discards untagged frames at ingress. To return to the default configuration, use the
no form of this command.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
413
VLAN Commands