E
NABLE DIGITAL MODE
Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
1
Click Sounds and Audio Devices.
2
Click the Hardware tab.
3
Double-click the name of your CD drive.
4
Click the Properties tab
5
Check the Enable digital CD audio for this CD-ROM device box.
6
E
LIMINATE POSSIBLE INTERFERENCE
for interference.
R
UN THE SPEAKER DIAGNOSTICS
R
EINSTALL THE AUDIO DRIVER
C
HECK THE DEVICE OPTION SETTING
is set to On. Exit system setup and restart your computer.
Enter system setup
R
D
D
UN THE
ELL
IAGNOSTICS
C
HECK FOR SOFTWARE AND HARDWARE CONFLICTS
No sound from headphones
C
HECK THE HEADPHONE CABLE CONNECTION
the headphone connector.
D
ISABLE DIGITAL MODE
Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
1
Click Sounds and Audio Devices.
2
Click the Hardware tab.
3
Double-click the name of your CD drive.
4
Click the Properties tab.
5
Uncheck the Enable digital CD audio for this CD-ROM device box.
6
— Your speakers do not work if the CD drive is operating in analog mode.
— Turn off nearby fans, fluorescent lights, or halogen lamps to check
Enter system setup
—
— Ensure that the headphone cable is securely inserted into
— Your headphones do not work if the CD drive is operating in digital mode.
and ensure that the Audio Controller option
295
Solving Problems