Replacing The Power Supply - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Power Supply

Replacing the Power Supply

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
Follow the procedures in
1
Disconnect the DC power cables from the system board and the drives.
2
Note the routing of the DC power cables underneath the tabs in the computer chassis as you
remove them from the system board and drives. You must route these cables properly when you
replace them to prevent their being pinched or crimped.
Remove the two screws that attach the power supply to the back of the computer chassis.
3
Remove the CD/DVD drive
4
Press the release button located on the floor of the computer chassis.
5
"Before You Begin."
and carefully set it aside.
145