Inside Your Computer - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

3 network adapter connector To attach your computer to a network or broadband device, connect one end of a
4 network activity light
5 line-in connector
6 line-out connector
7 microphone connector
8 USB 2.0 connectors (6)
9 video connector
10 serial connector

Inside Your Computer

CAUTION:
Product Information Guide.
CAUTION:
removing the computer cover.
NOTICE:
disconnect cables from the system board.
100
Desktop Computer
network cable to either a network jack or your network or broadband device. Connect
the other end of the network cable to the network adapter connector on the back panel
of your computer. A click indicates that the network cable has been securely attached.
NOTE:
Do not plug a telephone cable into the network connector.
On computers with a network connector card, use the connector on the card.
It is recommended that you use Category 5 wiring and connectors for your network. If
you must use Category 3 wiring, force the network speed to 10 Mbps to ensure reliable
operation.
Flashes a yellow light when the computer is transmitting or receiving network data. A
high volume of network traffic may make this light appear to be in a steady "on" state.
Use the blue line-in connector to attach a record/playback device such as a cassette
player, CD player, or VCR.
On computers with a sound card, use the connector on the card.
Use the green line-out connector to attach headphones and most speakers with
integrated amplifiers.
On computers with a sound card, use the connector on the card.
Use the pink microphone connector to attach a personal computer microphone for voice
or musical input into a sound or telephony program.
On computers with a sound card, the microphone connector is on the card.
Use the back USB connectors for devices that typically remain connected, such as
printers and keyboards.
Plug the cable from your
NOTE:
If you purchased an optional graphics card, this connector will be covered
by a cap. Connect your monitor to the connector on the graphics card. Do not remove
the cap.
NOTE:
If you are using a graphics card that supports dual monitors, use the y-cable
that came with your computer.
Connect a serial device, such as a handheld device, to the serial port. The default
designations are COM1 for serial connector 1 and COM2 for serial connector 2.
For more information, see "
Before you begin any of the procedures in this section, follow the safety instructions in the
To avoid electrical shock, always unplug your computer from the electrical outlet before
Be careful when opening the computer cover to ensure that you do not accidentally
VGA-compatible monitor into the blue connector.
System Setup Options
."