Removing A Pci Card From The Riser-Card Cage - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Enter system
a
Connect the network cable to the network adapter card's connectors. Do not connect the
b
network cable to the integrated network connector on the back panel of the computer.
Install any drivers required for the card as described in the card documentation.
15

Removing a PCI Card From the Riser-Card Cage

Follow the procedures in
1
Remove the riser-card cage:
2
Check any cables connected to cards through the back-panel openings. Disconnect any
a
cables that will not reach the riser-card cage once they are removed from the computer.
Gently pull on the handle and lift the riser-card cage up and away from the computer.
b
Press in on the tab to raise the card retention latch.
3
If necessary, disconnect any cables connected to the card.
4
Grasp the card by its top corners, and ease it out of its connector.
5
If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
6
If you need a filler bracket,
134
setup, select Network Controller and change the setting to Off.
"Before You Begin."
1 riser-card cage
2 handle
contact Dell.
1
2