Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual page 71

1
1 card retention latch
2 alignment guide
3 card
Open the card retention mechanism that secures the card in place from the top:
3
Place your thumb on the top of the card retention mechanism and grip the bottom of the
a
retention mechanism with your fingers.
With your free hand, gently squeeze the sides of the card retention mechanism to release it
b
from the tab slots holding it in place.
Pivot the card retention mechanism upward to release it from the two tab slots.
c
If necessary, disconnect any cables connected to the card.
4
Grasp the card by its top corners, and ease it out of its connector.
5
If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
6
If you need a filler bracket,
NOTE:
Installing filler brackets over empty card-slot openings is necessary to maintain FCC
certification of the computer. The brackets also keep dust and dirt out of your computer.
2
4 card-edge connector
5 card connector
6 release tab
contact Dell.
3
4
5
6
71