System Setup Options - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

System Setup Options

NOTE:
Depending on your computer and installed devices, the items listed in this section may or may
not appear.
System
System Info
CPU Info
Memory Info
Date/Time
Boot Sequence
Drives
Diskette Drive
Drive 0 through
Drive n
Module Bay
Drive Controller
Error Reporting
Lists the computer name, BIOS version, and service tag.
Identifies whether the computer's processor supports Hyper-Threading and
identifies the CPU speed, bus speed, clock speed, and L2 cache.
Indicates amount of installed memory, computer memory speed, amount of video
memory, size of the display cache, and channel mode (dual or single).
Displays current date and time settings.
The computer attempts to boot from the sequence of devices specified in this list.
This option enables or disables the floppy drive. The options are Off, Internal,
USB, and Read Only.
Identifies and enables and disables the drives attached to the SATA or IDE
connectors on the system board and lists the capacities for the hard drives.
NOTE:
These options appear as Drive 0 through Drive 3 for the desktop, mini
tower, and small form computers and Drive 0 though Drive 5 for the ultra small
form factor computer.
Enables or disables devices in the module bay. The options are On or Off. The
default setting is On.
NOTE:
The USB Controller and Diskette Drive setup option affect operation
of the optional floppy drive in the module bay.
NOTE:
This option is only available for the ultra small form factor computer.
Configures the serial ATA controller's operating mode. Normal enables the serial
ATA controller to operate in its serial ATA native mode only. Compatible enables
the serial ATA controller to operate in serial/parallel ATA combination mode.
This setting determines whether hard drive errors are reported or not during system
setup.
Advanced Features
247