Replace the computer
12
Connect any cables that should be attached to the card.
13
NOTE: See the documentation for the card for information about the card's cable connections.
NOTICE:
into the computer.
If you installed a sound card:
14
Enter system
a
Connect external audio devices to the sound card's connectors. Do not connect external
b
audio devices to the microphone, speaker/headphone, or line-in connectors on the back
panel of the computer.
If you installed an network adapter card and want to turn off the integrated network adapter:
15
Enter system
a
Connect the network cable to the network adapter card's connectors. Do not connect the
b
network cable to the integrated network connector on the back panel of the computer.
Install any drivers required for the card as described in the card documentation.
16
Removing a PCI Card
Follow the procedures in
1
Gently push the release tab on the card retention latch from the inside to pivot the latch open. The
2
latch will remain in the open position.
70
cover.
To connect a network cable, first plug the cable into the network wall jack and then plug it
setup, select Audio Controller, and change the setting to Off.
setup, select Network Controller, and change the setting to Off.
"Before You
Begin."